摘 要
動力定位系統（Dynamic Positioning System）是船舶在不借助錨泊系統的情況下根據環境測量系統，檢測出船舶實際位置和目標位置的偏差，依靠自身動力系統，在控制系統的控制下抵御外界風、浪、流的干擾，使其保持預定的航向航速或者固定在要求的海平面上。動力定位是實現耙吸挖泥船精確疏浚定位、提升疏浚檔次、提高疏浚效益的一種重要保障。
論文針對實際工程項目，以中交天津航道局建造的“通程號”18000方耙吸式挖泥船動力定位系統作為研究課題。根據耙吸挖泥船動力定位系統的要求，對動力定位系統的實施方案及硬軟件設計進行了探討與研究。論文具有明確的工程應用背景和較高的實用價值，其主要工作如下：
首先以“通程號”為應用背景，分析了耙吸挖泥船集成疏?？刂葡到y(tǒng)。對動力定位系統的基本原理、結構組成及基本功能進行了介紹。針對耙吸挖泥船復雜的工作流程及疏浚過程的階段性，提出了耙吸挖泥船動力定位系統的八大功能。
其次在動力定位系統結構和功能的基礎上，構建整個系統的硬件框架和網絡結構，并對動力定位系統中的環境測量信號進行分析描述，最后對動力系統與各個執行機構、疏浚控制系統以及功率管理系統接口信號進行分析。
然后以“通程號”為應用對象，具體說明了該船的復合驅動方式及全船電網模式，接著在介紹耙吸挖泥船功率管理系統的基礎上，設計了其功率管理系統的基本框架，并結合動力定位系統提出了低壓電站的自動管理以及艏側推的管理方法。
最后在動力定位系統軟件部分介紹了如何利用OPC客戶端采集PLC系統的數據以及串口信號的采集方法和解析協議。另外也針對實際工程提出了動力定位系統中執行機構的控制邏輯和要求。
論文的主要研究成果已在該耙吸挖泥船上進行了應用，取得了很好的實船效果，獲得了航道局、公司和導師的肯定與好評。

關鍵詞：耙吸式挖泥船；動力定位；疏?？刂葡到y(tǒng)；功率管理系統;


Abstract
Dynamic positioning system is that ship measure the error of ship's actual position and target location according to the environment measure system without the aid of the ship mooring system, and resist the external signal disturbance under the function of the control system by own power system to keep the required speed and the scheduled course or fixed sea level. Dynamic positioning is an important guarantee for precise dredging orientation, ascending dredging class, improving dredging benefits of a suction hoper dredger .
This thesis focuses on the dynamic positioning system of the 18,000 squares trailing suction hopper dredger named “TONGCHENGHAO”, constructed by cccc-Tianjin Dredging. The implementation plan, hardware and software design of dynamic positioning system were studied according to the system requirement. The applied background of this thesis is very clearly, and the practical value is very high. The main task of this thesis is as follows.
Firstly, integration hopper dredging control system of Trailing suction hopper dredger is analysed based on the “TONGCHENGHAO”. Then the principle of dynamic positioning system, composition and functions are introduced. The eight functions of the dredger dynamic positioning system were provided according to the complex work process and dredging process phases of the dredger.
Secondly, the entire system’s hardware and the network are designed based on the structure and function of the dynamic positioning system, and the measurement signal of environment is described. Finally the interface signals between dynamic positioning system and the various implementing agencies, dredging control system, power management system, is analyzed.
Thirdly, according to 18,000 square trailing suction dredger, the power structure of the ship and the ship's power grid configuration mode are detailed, and the ship's power management system is introduced. And then the power management system framework is designed, low-voltage automatic power management, and bow thruster management is proposed combined with the dynamic positioning system.
At last, how to use the OPC client to collect date of PLC and serial signal acquisition methods and analytical protocols are described at dynamic positioning software section. The actuator control logic and requirements is proposed for the dynamic positioning system according to actual project.
The main results of this thesis are used on the “TONGCHENGHAO”. Dynamic positioning system has obtained the enterprise, company and my teacher's high praise because of its perfect performance.

Key words: Trailing Suction Dredger; Dynamic Positioning (DP); Integrated Hopper dredging control system (IHDCS); Power Manage System (PMS);



目 錄
摘 要 I
Abstract II
目 錄 III
第1章 緒論 1
1.1 課題研究的背景、目的和意義 1
1.1.1 課題研究的背景 1
1.1.2 課題研究的目的和意義 2
1.2 國內外研究現狀和發展趨勢 2
1.3 本文的研究內容和主要工作 4
第2章 耙吸挖泥船疏?？刂葡到y(tǒng)及動力定位介紹 6
2.1耙吸挖泥船集成疏?？刂葡到y(tǒng) 6
2.2 動力定位系統介紹 8
2.2.1 動力定位系統原理 8
2.2.2 動力定位系統的結構 10
2.2.3動力定位系統基本功能 11
2.3耙吸挖泥船動力定位系統功能 14
2.4 本章小結 17
第3章 耙吸挖泥船動力定位硬件系統 18
3.1動力定位硬件系統設計 18
3.3.1 控制工作站 19
3.3.2 PLC系統設計 19
3.2動力定位網絡系統設計 20
3.3 環境測..