定量杯式灌裝機畢業設計論文.zip
定量杯式灌裝機畢業設計論文, 摘要 隨著人們對包裝的不斷重視,對包裝要求的不斷提高,人們開始把目光投向了包裝機械行業。然而,我國的包裝機械還處于剛起步的狀態,包裝機械的品種不齊全,自動化程度不高 液體物料的灌裝, 首先要解決定量問題。液體物料的定量方法可分為三類:即按重量定量、體積定量和控制液位定量,按重量...
該文檔為壓縮文件,包含的文件列表如下:


內容介紹
原文檔由會員 秋風2013 發布
摘要
隨著人們對包裝的不斷重視,對包裝要求的不斷提高,人們開始把目光投向了包裝機械行業。然而,我國的包裝機械還處于剛起步的狀態,包裝機械的品種不齊全,自動化程度不高
液體物料的灌裝, 首先要解決定量問題。液體物料的定量方法可分為三類:即按重量定量、體積定量和控制液位定量,按重量定量,定量精度較高,但需要一套稱重裝置,從而使定量機構的結構復雜、成本高、定量速度低,目前很少采用;后兩種定量方法, 定量精度一般, 但結構簡單、速度高。目前的灌裝機供料機構基本采用體積定量和控制液位定量。
本次畢業設計適用小型飲料業的定量杯式灌裝機。我首先針對目前的發展?fàn)顩r提出了一種總體設計方案,接著對灌裝機進行總體布局設計、典型零件的結構設計與校核以及對軸的加工工藝的概述,最后分析了定量杯式灌裝機的經濟效益。
關鍵字:定量杯,灌裝,液體物料
Abstract
Along with people’s continuously valuing packaging and the request on packaging continuously raising, people start to turn their concern to packaging machine profession. However, the packaging machine of our country is still placed in just the appearance of start and packaging machine species are not well-found.
For the filling of liquid materials,tht first we should solve the question of quantitative. The quantitative of liquid materials can be divided into three kinds: weight quantitative, volume quantitative,control the level of liquid quantitative. Quantitative precision of weight quantitative is higher, but it need a set of weight device,so the system will spend more and be complex ,now there are almost no people use it.
Quantitative precision of The posterior two quantitative methods is normal, but the structure is simple and have high speed. At preset feeding mechanism of filling machine is usually use volume quantitative and control the level of liquid quantitative.
In this graduation design, basing on the existing machine, we design a kind of continuous mode filling machine which is suitable in the small beverage industry。I first propose a plan according to the present development condition. and then carry on the blister packaging total layout design and typical parts structural design and the outlines of the axis machining process, finally analyzed the economic performance of measuring cup filling machine。
Keywords: measuring cup filling liquid material
目錄
第一章 緒論 1
1.1 研究的背景和意義 1
1.1.1 研究的背景 1
1.1.2 研究的意義 1
1.2 定量杯式灌裝機簡介 2
1.3 本課題研究的主要內容 2
1.4 定量杯式灌裝機發展趨勢 2
第二章 定量杯式灌裝機總體設計 5
2.1 定量杯式灌裝機的設計思想 5
2.2 包裝機整體設計方案的選擇 5
2.3定量杯式灌裝機的技術條件 5
2.4 定量杯式灌裝機的總體設計 6
2.4.1 定量杯式灌裝機工藝流程 6
2.4.2 定量杯式灌裝機的輸送裝置 7
2.4.3 定量杯式灌裝機的灌裝裝置 7
2.4.4 定量杯式灌裝機的液面控制裝置 8
2.4.5 定量杯式灌裝機的傳動控制裝置 9
2.5 定量杯式灌裝機的主要技術參數 12
2.6 定量杯式灌裝機的保護與維修 12
第三章 定量杯式灌裝機典型零件的設計與校核 14
3.1 電機的選擇 14
3.1.1 輸送裝置電機的選擇 14
3.1.2 傳動裝置的總傳動比 15
3.2供送機構中電機的選擇 14
3.3軸承的選擇與校驗 26
3.4蝸桿傳動的設計 15
3.5帶傳動裝置的設計 29
第四章 軸的加工工藝 32
第五章 定量杯式灌裝機社會經濟效益分析 36
文獻綜述 37
致 謝 39
隨著人們對包裝的不斷重視,對包裝要求的不斷提高,人們開始把目光投向了包裝機械行業。然而,我國的包裝機械還處于剛起步的狀態,包裝機械的品種不齊全,自動化程度不高
液體物料的灌裝, 首先要解決定量問題。液體物料的定量方法可分為三類:即按重量定量、體積定量和控制液位定量,按重量定量,定量精度較高,但需要一套稱重裝置,從而使定量機構的結構復雜、成本高、定量速度低,目前很少采用;后兩種定量方法, 定量精度一般, 但結構簡單、速度高。目前的灌裝機供料機構基本采用體積定量和控制液位定量。
本次畢業設計適用小型飲料業的定量杯式灌裝機。我首先針對目前的發展?fàn)顩r提出了一種總體設計方案,接著對灌裝機進行總體布局設計、典型零件的結構設計與校核以及對軸的加工工藝的概述,最后分析了定量杯式灌裝機的經濟效益。
關鍵字:定量杯,灌裝,液體物料
Abstract
Along with people’s continuously valuing packaging and the request on packaging continuously raising, people start to turn their concern to packaging machine profession. However, the packaging machine of our country is still placed in just the appearance of start and packaging machine species are not well-found.
For the filling of liquid materials,tht first we should solve the question of quantitative. The quantitative of liquid materials can be divided into three kinds: weight quantitative, volume quantitative,control the level of liquid quantitative. Quantitative precision of weight quantitative is higher, but it need a set of weight device,so the system will spend more and be complex ,now there are almost no people use it.
Quantitative precision of The posterior two quantitative methods is normal, but the structure is simple and have high speed. At preset feeding mechanism of filling machine is usually use volume quantitative and control the level of liquid quantitative.
In this graduation design, basing on the existing machine, we design a kind of continuous mode filling machine which is suitable in the small beverage industry。I first propose a plan according to the present development condition. and then carry on the blister packaging total layout design and typical parts structural design and the outlines of the axis machining process, finally analyzed the economic performance of measuring cup filling machine。
Keywords: measuring cup filling liquid material
目錄
第一章 緒論 1
1.1 研究的背景和意義 1
1.1.1 研究的背景 1
1.1.2 研究的意義 1
1.2 定量杯式灌裝機簡介 2
1.3 本課題研究的主要內容 2
1.4 定量杯式灌裝機發展趨勢 2
第二章 定量杯式灌裝機總體設計 5
2.1 定量杯式灌裝機的設計思想 5
2.2 包裝機整體設計方案的選擇 5
2.3定量杯式灌裝機的技術條件 5
2.4 定量杯式灌裝機的總體設計 6
2.4.1 定量杯式灌裝機工藝流程 6
2.4.2 定量杯式灌裝機的輸送裝置 7
2.4.3 定量杯式灌裝機的灌裝裝置 7
2.4.4 定量杯式灌裝機的液面控制裝置 8
2.4.5 定量杯式灌裝機的傳動控制裝置 9
2.5 定量杯式灌裝機的主要技術參數 12
2.6 定量杯式灌裝機的保護與維修 12
第三章 定量杯式灌裝機典型零件的設計與校核 14
3.1 電機的選擇 14
3.1.1 輸送裝置電機的選擇 14
3.1.2 傳動裝置的總傳動比 15
3.2供送機構中電機的選擇 14
3.3軸承的選擇與校驗 26
3.4蝸桿傳動的設計 15
3.5帶傳動裝置的設計 29
第四章 軸的加工工藝 32
第五章 定量杯式灌裝機社會經濟效益分析 36
文獻綜述 37
致 謝 39
TA們正在看...
- 小區物業管理系統vb設計.rar
- 防止變電運行事故的對策研究-plc在消防控制中的應用.rar
- 110kv無人值守變電站設計.rar
- 距離保護可靠系數及i段最小保護范圍的研究.rar
- 如何預防電網瓦解和大面積停電事故.rar
- 配網產生諧波的危害與抑制措施.rar
- 變電站接地網優化設計.rar
- 電力線載波通信設計及其在勵磁系統中應用.rar
- 高校計算機網絡違法犯罪的特點及防范對策.rar
- 論正當防衛的正確把握與適用.rar